18"x18" Bottom Hinged Intake Door with 120vac Electrical Interlock, "WM" Series

• Nominal Size: 18" Width x 18" Height.
• Complete Chute Intake Door Assembly.
• Bottom Hinged.
• Hand Operated.
• Self Closing.
• Lever Style Handle.
• Positive Latching.
• 1-1/2 hour UL labeled.
• "WM" Western Chutes/Midland Style.

Includes:

Operator: Replaceable pull handle with thumb latch trigger assembly.
Door closer: Mounted outside to the trash opening in a fully enclosed box accessible from the front to ensure years of trouble free operation.
Door panel: 1/2" shaft hinge system is welded to the door panel which screws into the frame, allowing replacement. Panel made with 20 gauge type 430 stainless steel and 18 gauge galvannealed steel.
Trim: Stainless Steel, available blank or embossed with "Rubbish", "Soiled Linen", or "Recycle".

120v AC Electrical Interlock

Push button operation and in-use indicator light. Only one door can be opened at a time. This reduces clogging and enhances safety during peak usage. User must unlock the door by pressing the button then operating the latch or handle separately. Interlocks are normally locked, so during a power failure, the doors cannot be opened. All doors can be locked by turning off the power switch when working beneath the chute, reducing liability and injuries. Engineered for use on a 120vac 60hz line voltage, therefore, the intake door electrical panels and components are UL listed. Wiring is to be in a conduit in most applications. Check with your local building authority regarding installation requirements.

Requires SKU #500282, Electrical Interlock Remote Lock Out Switch, and power to operate.

A direct replacement for: Midland Chutes #MB1818EI, formerly Midland Metalcraft.

Can retrofit to other chutes with sheet metal adaptors and wall modifications to fit chute door openings for doors of the same size. Replaces easily with minimal wall damage. Accessories available include electrical interlocks, key locks, and more.

Complies with building codes, NFPA-82 and ASTM standards.