Accessories

Add four (4) Angle Clips to the bottom or top of a new chute section. Bottom clips allow a discharge door to be attached. Discharge door and/or housing not included. Top clips allow the new chute section to be attached to a chute section above.

Add per foot #13ga reinforcing impact plate to any round or square chute offset. Indicate how many feet in quantity field before checking out. Price is per foot.

ADD one shop spray coat standard sound dampening and one coat Aquaplas premium sound dampening to the exterior of a double offset up to 6 feet long. While not usually sufficient to require additional work, please note that sound dampening will...

ADD one shop spray coat standard sound dampening and one coat Aquaplas premium sound dampening to the exterior of a single offset up to 4 feet long. While not usually sufficient to require additional work, please note that sound dampening will...

Adds a coating of Western Chutes premium sound dampening and rust protector to the exterior of chute sections. Price is per lineal foot of round or square chute. Please specify the length of chute to be sound dampened. See separate adds for...

ADD one shop spray coat standard sound dampening to the exterior of a double, chute offset up to 6 feet long. While not usually sufficient to require additional work, please note that sound dampening will suffer some damage in shipping so you may...

ADD one shop spray coat standard sound dampening to the exterior of a single, chute offset up to 4 feet long. While not usually sufficient to require additional work, please note that sound dampening will suffer some damage in shipping so you may...

Adds a coating of Western Chutes standard sound dampening and rust protector to the exterior of chute. Price is per lineal foot of round or square chute. Please specify the length of chute to be sound dampened as quantity.

This filter system is designed for use with The Chute Doctors 4.6 & 10 gallon air supply systems to protect the sensitive logic controller / signal standardizers used in pneumatic chute doors, ensuring a clean dry air supply, preventing damage to...

This compressor reservoir tank auto-drain system is designed for use with the Chute Doctors 4.6 & 10 gallon air supply systems to protect the sensitive logic controller/signal standardizer used in pneumatic chute doors, ensuring a clean dry air...

Companion Clip for purposes of attaching the chute discharge door to the bottom of the chute or multiple sections together. The companion clip needs to be welded or bolted to the chute body. Another clip welded to the top of the discharge door...

Companion Clip for purposes of attaching the chute discharge door to the bottom of the chute or multiple sections together. The companion clip needs to be welded or bolted to the chute body. Another clip welded to the bottom of the chute may be...

Change an Offset product to a custom size. Requires single or double offset be included in cart. This charge is to customize a single or double offset and is an ADD to the price of same. The entire product will still be manufactured of the same...

Change a standard Type AC Horizontal Chute Discharge Door housing product to a custom size. Requires standard round or square housing be included in cart. This charge is to customize a standard housing and is an ADD to the price of the standard...

2" x 1.5" x 48" long, #20 gauge galvannealed angle piece to be attached to shaft walls when draft stop is being installed between floors or has no floor support structure inside the chute shaft. This can be cut in the field to any length needed.

24 volt Electrical Interlock Power Supply for "W" Series chute intake doors, enabling them to be outfitted with Lock-Up style controls. The standard "W" series electrical interlock intake doors require that the user press and hold down a button...

Roll of 1" wide x 10’ long 18 gauge galvannealed hanger iron with holes for supporting and stabilizing horizontal discharge doors under light load conditions. To be screwed to discharge door frame or adaptor assembly and mounted to the ceiling or...

One pair 1/2"x30" hanger rods with couplings to suspend offset from deck or floor above. Installer to provide appropriate anchoring method to attach rod to deck or floor above. Hangers are to be installed at the top of the offset and at the...

One pair 1/2"x60" hanger rods with couplings to suspend offset from deck or floor above. Installer to provide appropriate anchoring method to attach rod to deck or floor above. Hangers are to be installed at the top of the offset and at the...

Roll of 1-1/2" wide x 20’ long 26 gauge galvannealed hanger strap with holes for stabilizing horizontal discharge doors under light load conditions. To be screwed to discharge door frame or adaptor assembly and mounted to the ceiling or wall as...