Electrical Interlocks Parts

Replacement bulb used in Electrical Interlock light assemblies which is designed to lasts 10,000 life hours. This bulb is 120 volts. It has a T3-1/4 miniature bayonet base. These bulbs come five to a case. See attached spec's to verify dimensions...

Replacement bulb used in Electrical Interlock light assemblies which is designed to lasts 10,000 life hours. This bulb is 24 volts. It has a T3-1/4 miniature bayonet base. These bulbs come five to a case. See attached spec's to verify dimensions...

Replacement LED integrated monoblock indicator for trash chute or linen chute intake doors, electrical interlocks, and interlock control panels with 110vac/dc indicator light. Fits 22mm (15/64") hole and is available in Red, Green or Yellow with...

Replacement LED integrated monoblock indicator for trash chute or linen chute intake doors, electrical interlocks, and interlock control panels with 24vac/dc indicator light. Fits 22mm (15/64") hole and is available in Red, Green or Yellow with...

This light is for use on electrical interlock control panels which require a 22mm, steady, green illuminated push button. This light comes in LED only for high quality brightness and up to 100,000 hours of operation. This light comes assembled...

Used as a replacement for the 120vac Electrical Interlock Chute Intake Door plunger. The plunger latches the door shut and is operated by the solenoid allowing the chute intake door to be opened when the button is pressed. This plunger assembly...

PLEASE NOTE, THIS IS ONLY THE PLUNGER ASSEMBLY. Used as a replacement for the 24vac Electrical Interlock Chute Intake Door plunger. The plunger latches the door shut and is operated by the solenoid allowing the chute intake door to be opened when...

Standard push button replacement for Midland Chutes intake doors with electrical interlock. User must unlock the door by pressing the button then operating the latch or handle separately. Replacement indicator lights and roller switches for this...

This light is for use as a replacement on the “W” Series, compactors and 120 volt electrical interlock control panels. Light measures 22mm and is equipped with an incandescent light behind a red frosted diffuser. The monoblock design allows for...

This red, low profile light is for use as a replacement on the chute intake door panel for a 120 volt electrical interlock system. Light will snap-fit into a panel 0.02" to 0.10" thick and a hole 0.50" to 0.505". This light comes complete and...

This circuit breaker is used in electrical interlock power supply boxes manufactured by Valiant Products Inc. It measures 2.31” high x 1.379” long x .571” wide. It has a black plastic button actuator.Additional products available for Valiant...

Box frame, steel solenoid with zinc plated frame and plunger can be used as a replacement in “W” Series Electrical Interlock systems. The current at maximum stroke is 2.20 amps with Class A coil insulation and resistance of 9.5 ohms. The distance...

This clear, flat light is for use as a replacement on the chute intake door panel for an electrical interlock system, typically a sorting system. Light will snap-fit into a panel. This light comes complete and ready for installation. Commonly...

This light is for use as a replacement on the “M" and "WM” Series, 120 volt electrical interlock chute intake doors. Light is equipped with an incandescent light bulb. See attached spec's to verify dimensions of this product before ordering.

Used as a replacement for the 120vac Electrical Interlock Chute Intake Door solenoid and plunger. This solenoid operates the chute intake door so it can be opened when the button is pressed. This is an open box style, continuous, pull style...

Electrical Interlock chute intake doors manufactured by Wilkinson and Wilkinson Hi-Rise utilize this micro switch. The micro switch is used to activate the latch allowing the door to open. This switch has a 2-1/2” lever, screw terminals, and is...

This rectifier is found in electrical interlock power supply boxes manufactured by Valiant Products Inc. This is used to change the AC current to DC. It is 600 volts and 150 amps. RoHS complaint.As capacitors age, more load is placed on the...

This roller switch is for use as a replacement on the “M" and "WM” Series, 120 volt electrical interlock chute intake doors. The switch is used to activate the latch allowing the door to open. See attached spec's to verify dimensions of this...

Electrical Interlock chute intake doors manufactured by Wilkinson and others utilize this type of roller switch to sense when door opens and closes. The micro switch is used to activate the latchs locking out the other doors when activated. This...