Miscellaneous Parts
Replacement photoelectric sensor (photo eye) for RAM series trash compactors is used to determine when the compactor has trash in the hopper for automatic cycling in chute-fed operations. See attached specs for this product before ordering.
Replacement Pick Up Check Valve for our Odor Control Spray Units. A check valve is installed at the bottom, or foot, of the pick-up tube in our spray units. This combination check valve and screen prevents the solution from draining back down...
Pneumatic Actuator & Switch Assembly for Midland Electrically Interlocked Pneumatic Operated Chute Intake Door
Pneumatic plunger to release the door latch on a push button automatic pneumatic operated chute intake door. Used on doors manufactured by Western Chutes, Architectural Refuse Solutions (ARS), Chute Source LLC, Wilkinson Chutes Canada and many...
This poly tubing is used for our Odor Control Spray Systems to distribute high pressure air to the spray units in the system. It comes in 100’ rolls and has a 1/4” outside diameter (OD). This natural, translucent LDPE tubing is non-toxic,...
Pre-Programmed Zilio 3 Programmable Logic Controller (PLC) for chute door electrical interlock controls, trash or garbage compactors, recycling systems, chute cleaning systems and more. This relay is used in equipment manufactured by Western...
Stainless steel oil filled pressure gauge for use in any series trash compactor or recycling system power pack that operates within this pressure range. This pressure gauge measures 0-3000 PSI and has a 1/4” NPT bottom stem fitting for attachment...
Western Chutes Chute Janitor™ Cleaning Control Panel red light assembly. This assembly has a 30.5mm diameter, uses a Type 4/13 incandescent light, has a red lens, and is 120VAC. UL Certification Listed E131568 and CSA Certification 68551. See...
Western Chutes Chute Janitor™ Cleaning Control Panel red light assembly. This assembly has a 30.5mm diameter, uses a Type 4/13 incandescent light, has a red lens, and is 24VAC. UL Certification Listed E131568 and CSA Certification 68551. See...
This red, dome light is for use as a replacement on the chute intake door panel for a 24 volt electrical interlock system. Light will snap-fit into a panel 0.8mm to 6mm thick and an 10.1mm hole. This light comes complete and ready for...
Replacement solenoid valve for Chute Janitor™ chute cleaning systems. This solenoid valve is used in the Western Chutes, Compactors & Recycling Systems automatic Chute Janitor™ multi-head 120vac chute cleaning system. Valve is for 3/8" pipe and...
Replacement Jug holding 22 liters for use in our Odor Control Spray Units. Includes cap with hole for pick-up tube to be installed. Replacement pick-up tube offered separately. See attached spec's for this product before ordering.
This red, dome light is for use as a replacement on the chute intake door panel for a 24 volt electrical interlock system. Light will snap-fit into a panel 0.8mm to 6mm thick and an 8.1mm hole. This light comes complete and ready for...
This micro switch is used for replacement in the pneumatic chute intake doors manufactured by Midland Chutes. The micro switch allows the intake door to open or close by releasing the latch. It is a 15 amp, 250 vac switch. It is single pull...
This actuator and elbow is used with a micro switch in pneumatic chute intake doors manufactured by Midland Chutes. It works with the micro switch to allow the door to open or close by releasing the latch. It measures 11/16” in diameter and is...
Heavy duty, extended, nitrogen filled, gas trash chute or linen chute intake door closer complete with ball socket mount end on rod and cylinder used in Western Chutes WM & M Series bottom hinged ADA compliant chute intake doors as well as...
Heavy duty, extended, nitrogen filled, gas trash chute or linen chute intake door closer complete with ball socket mount end on rod and cylinder And boost spring used in Western Chutes WM & M Series bottom hinged ADA compliant chute intake doors...
Set of two CH501 keys for use on compactor, paddle-style access door handles.
Complete Directional Control Valve to be used as a replacement on Western Chutes PAQ-4 automatic compactors and in all types of automated hydraulic equipment. This is a direct replacement for part number DSG-2B2-N-01-A110. This is a standard...
This bronze and steel foot pedal is used on most “W” Series, Foot Operated, Rubbish Chute and Soiled Linen Chute Intake Doors. Cast bronze, it attaches to the stainless steel pedal trim with a round shaft pivot and bolts to the foot pedal...